While Wifco has a very wide range of manufacturing capabilities and creates customized solutions, the below list comprises common parts and sizes ordered by customers. Should you have any questions regarding specific products or capabilities, please contact us for a prompt reply.

Use the links below to jump to a part of this page, or “Ctrl + F” (Windows) “Command + F” (Mac) on your keyboard to search in your browser.

 

 

Walkway and Stairway Assemblies

Stairways – Regular Steps

  • 9 Step Stairway w/gussets
  • 10 Step Stairway w/gussets
  • 11 Step Stairway
  • 14 Step Stairway
  • 15 Step Stairway
  • 19 Step Stairway
  • 20 Step Stairway
  • 27 Step Stairway
  • 35 Step Stairway

Stairways -Grated Steps

  • 9 Grated Step Stairway w/gussets
  • 10 Grated Step Stairway
  • 11 Grated Step Stairway
  • 14 Grated Step Stairway
  • 15 Grated Step Stairway
  • 19 Grated Step Stairway
  • 20 Grated Step Stairway
  • 27 Grated Step Stairway
  • 35 Grated Step Stairway

Walkways

  • 30″ Single Landing w/ Y-braces
  • 3′ Single Landing
  • 16′ Walkway w/Y-braces
  • 18′ Walkway
  • 20′ Walkway
  • 22′ Wallway
  • 18′ Walkway w/Two Go-In
  • 18′ Walkway w/Four Go-In
  • 13′ 6″ Extension w/Y-brace & midrails
  • 15′ Extension
  • 15′ 6″ Extension
  • 19′ 6″ Extension
  • 25′ 6″ Extension
  • Go – In (12″)
  • Go – In (18″)
  • 15′ 6″ Extension w/one Go-In
  • 15′ 6″ Extension w/two Go-In

Other Products

  • Crossover – Economy w/ no hand rails (welded)
  • Crossover – Assembled 4 step
  • Crossover – Assembled 3 step
  • 26′ 6″ Ladder w/cage Non-OSHA (welded)

 

 

Walkway and Stairway Components

Punched Angle – 20 ft.

  • 1/8 x 2 x 2 x 20′ Double Punch w/ Offset Centers
  • 1/8 x 2 x 2 x 20′ Single Punch
  • 1/8 x 2 x 2 x 20′ Double Punch
  • 1/8 x 2 x 2 x 20′ Unpunched
  • 1/8 x 1 ½ x 1 ½ x 20′ Single Punch
  • 1/8 x 1 ½ x 1 ½ x 20′ Double Punch
  • 1/8 x 1 ½ x 1 ½ x 20′ Unpunched

Punched Angle – Pre-cut Double Punched 2″

  • 5 Hole x 2″ D.P.
  • 10 Hole x 2″ D.P.
  • 12 Hole x 2″ D.P.
  • 12-13 Hole x 2″ D.P – (Holes offset to opposite side)
  • 15 Hole x 2″ D.P.
  • 18 Hole x 2″ D.P.
  • 19 Hole x 2″ D.P.
  • 22 Hole x 2″ D.P.
  • 23 Hole x 2″ D.P.
  • 24 Hole x 2″ D.P.
  • 25 Hole x 2″ D.P.
  • 26 Hole x 2″ D.P.
  • 38 Hole x 2″ D.P.
  • 45 Hole x 2″ D.P.

Punched Angle – Pre-cut Single Punched 2″

  • 5 Hole x 2″ S.P.
  • 6 Hole x 2″ S.P.
  • 10 Hole x 2″ S.P.
  • 12 Hole x 2″ S.P.
  • 15 Hole x 2″ S.P.
  • 18 Hole x 2″ S.P.
  • R.H. 18 Hole x 2″ S.P. w/ OB Hole
  • L.H. 18 Hole x 2″ S.P. w/ OB Hole
  • R.H. 18 Hole x 2″ S.P. w/ OB Hole & 45° Notch
  • L.H. 18 Hole x 2″ S.P. w/ OB Hole & 45° Notch
  • 19 Hole x 2″ S.P.
  • 21 Hole x 2″ S.P.
  • 22 Hole x 2″ S.P.
  • 23 Hole x 2″ S.P.
  • 24 Hole x 2″ S.P.
  • R.H. 24 Hole x 2″ S.P. w/ OB Hole
  • L.H. 24 Hole x 2″ S.P. w/ OB Hole
  • R.H. 24 Hole x 2″ S.P. w/ OB Hole & 45° Notch
  • L.H. 24 Hole x 2″ S.P. w/ OB Hole & 45° Notch
  • 26 Hole x 2″ S.P.
  • 28 Hole x 2″ S.P.
  • 30 Hole x 2″ S.P.
  • 31 Hole x 2″ S.P.

Punched Angle – Pre-cut Single Punched 1 1/2″

  • 6 Hole x 1 1/2″ S.P.
  • 8 Hole x 1 1/2″ S.P.
  • 10 Hole x 1 1/2″ S.P.
  • 15 Hole x 1 1/2″ S.P.
  • 15 Hole x 1 1/2″ S.P. & 45° Notch Both Ends
  • 18 Hole x 1 1/2″ S.P.
  • 20 Hole x 1 1/2″ S.P.
  • 21 Hole x 1 1/2″ S.P.
  • 21 Hole x 1 1/2″ S.P. & 45° Notch Both Ends
  • 22 Hole x 1 1/2″ S.P.
  • 24 Hole x 1 1/2″ S.P.
  • 27 Hole x 1 1/2″ S.P.
  • 28 Hole x 1 1/2″ S.P.
  • 30 Hole x 1 1/2″ S.P.
  • 55 Hole x 1 1/2″ S.P.

Bolt On Steps

  • Regular Step
  • Top Step
  • Regular Step – Special w/ 1″ holes
  • Top Step (9″ x 26″) – Special w/ 1″ holes
  • Grated Step (Reg & Top)

Weld On Steps

  • 9″ x 26″ x 10 Ga. w/1 Lip
  • 10″ x 26″x 10 Ga. w/1 Lip
  • 6 1/4″ x 23 1/2″ x 10 Ga.w/ (2) 1″ Lips
  • 6 1/4″ x 23 1/2″ x 10 Ga.w/ (2) 2″Lips
  • 7″ x 24″ x 10 Ga.w/ 2 lips (B.W.)

Bolt On Pans – 26″ Wide

  • 11′ Pan – Bolt On
  • 10′ Pan – Bolt On
  • 9’6″ Pan – Bolt On
  • 9′ Pan – Bolt On
  • 8′ Pan – Bolt On
  • 7’6″ Pan – Bolt On
  • 7’4″ Pan – Bolt On
  • 7′ Pan – Bolt On
  • 6′ Pan – Bolt On
  • 5′ Pan – Bolt On
  • 4′ Pan – Bolt On
  • 3′ Pan – Bolt On
  • 3″ Pan – Bolt On
  • 2″ Pan – Bolt On
  • 1′ Pan – Bolt On
  • 10″ Pan – Bolt On
  • 9.5″ Pan – Bolt On
  • 36″ Pan – Bolt On – Special w/ 1″ holes
  • 30″ Pan – Bolt On – Special w/ 1″ holes
  • 9.5″ Pan – Bolt On – Special w/ 1″ holes
  • 48″ wide x 4′ Long Pan – Bolt On
  • 48″ wide x 6′ Long Pan – Bolt On
  • 48″ wide x 8′ Long Pan – Bolt On

Weld on Pans w/Reverse Bend

  • 10′ Pan- Rev Bend
  • 9′ Pan- Rev Bend
  • 8′ Pan- Rev Bend
  • 7′ Pan- Rev Bend
  • 6′ Pan- Rev Bend
  • 5′ Pan- Rev Bend
  • 4′ Pan- Rev Bend
  • 3′ Pan- Rev Bend
  • 48″ wide x 6′ Long Pan- Rev Bend
  • 48″ wide x 8′ Long Pan- Rev Bend

Weld on Flat Pans

  • 90″ x 23 1/2″
  • 60″ x 23 1/2″
  • 24″ x 23 1/2″

Toe Boards (4″ wide)

  • 10′ Toe Board
  • 9’6″ Toe Board
  • 9′ Toe Board
  • 8′ Toe Board
  • 8′ Toe Board w/ 1/2″ Flange
  • 7’6″ Toe Board
  • 7′ Toe Board
  • 6′ Toe Board
  • 5′ Toe Board
  • 4′ Toe Board
  • 3′ Toe Board
  • 32″ Toe Board
  • 30″ Toe Board
  • 26″ Toe Board
  • 20″ Toe Board

Grade Bands

  • 5′ x 8″ Grade Band
  • 5′ x 8″ Grade Band w/ Extra Holes
  • 10′ x 8″ Grade Band
  • 10′ x 8″ Grade Band w/ Extra Holes
  • Grade Band Stakes (1 1/2″ angle x 16″ long)

Other Walkway Components

  • Bolt with Nut ½” x 1″ Zinc Coated
  • Bolt with Nut ½” x 1½” Zinc Coated
  • R.H. Gusset (Large or Small)
  • L.H. Gusset (Large or Small)
  • Corner Gusset (Post)
  • Knee Brace Gusset
  • Hand Rail Caps (RH & LH)
  • 6 Hole Side Splicer
  • 8 Hole Side Splicer
  • 8 Hole Side Splicer (10 Ga.)
  • Stair Rail Spacer
  • Stairway Gusset (Pitch Plate)
  • 6 Hole Splicer x 3/16″
  • 8 Hole Splicer x 3/16″
  • Walkway Splicer Angle
  • Walkway Upright Gusset (w/ 5 holes)

 

 

Storage Tank and Vessel Components

Cleanout Frames & Covers (1/4″)

  • 24″ x 36″ ID Frame & Cover
  • 24″ x 36″ ID Frame w/ 2 Piece Cover
  • 24″ x 36″ ID Frame Only
  • Cover Only (1-Piece)
  • Cover Only (2-Piece, Window Style)
  • Cover Only (2-Piece, Overlap Style)
  • Cover w/ 5 holes (8″ Fire Tube)
  • 24″ x 36″ ID Frame & Cover w/ MTR & Stamp
  • 24″ x 36″ ID w/ 3″ Neck & radius to fit tank
  • 24″x 36″ ID w/ 1/4″ Cover, w/ weld seam polished flush
  • 24″x 36″ ID w/ 3 1/2″ Neck & Cover
  • 10″ X 32″ ID Frame & Cover
  • 12″ X 32″ ID Frame & Cover
  • 14″ x 32″ ID Frame & Cover
  • 14″ x 40″ ID Frame & Cover
  • 14″ X 46″ ID Frame & Cover
  • 16″ x 24″ ID Frame & Cover
  • 16″ x 36″ ID Frame & Cover
  • 18″ x 18″ ID Frame & Cover
  • 18″ x 18″ ID Frame w/ radius neck & Cover
  • 18″ x 24″ ID Frame & Cover
  • 18″ x 28″ ID Frame & Cover
  • 20″ x 30″ ID Frame & Cover
  • 20″ x 44″ ID Frame & Cover
  • 24″ x 24″ ID Frame w/ 7″ Neck & Cover
  • 24″ x 44″ ID – Frame & Cover
  • 100′ Neoprene Tank Gasket Rolls

Legs

  • 48″ x 20″ w/ 4″ lip
  • 48″ x 24″ w/ 4″ lip
  • 48″ x 28″ w/ 4″ lip
  • 48″ x 36″ w/ 4″ lip
  • 48″ x 44″ w/ 4″ lip
  • 48″ x 48″ w/ 4″ lip
  • 48″ x 56″ w/ 4″ lip

Name Plates

  • 3 x 7.5 w/ 1″ Leg
  • 5″ x 7″ w/ 1″ Leg
  • 5″ x 7″ w/ 1″ V-Leg
  • 5.5″ x 7″ x 2.5″ Leg
  • 4 1/2″ x 6 3/4″ w/ 1 1/8″ legs & (4) 1/8″ holes @ corners
  • 6 1/2″ x 7″ x 3/16″ w/ (4) 1/8″ thru hole

Lugs Welded to a Base

  • 1/4″ Lift Lug w/ 1/4″ base
  • 1/4″ Lift Lug welded to 5/16″ Base
  • 3/8″ Flat Bar Lug & 1/4″ x 8 x 13″ Base
  • 3/8″ Lift Lugs w/ 5/16″ Base
  • 3/8″ Lift Lug welded to 3/8″ Base
  • 5/16″ Lift Lug welded to 5/16″ Base
  • 3/4″ Flat Bar Lug & 1/4″ x 9 x 19″ Base
  • Welded WW Lugs w/2 slotted holes & 90 deg angle
  • Welded Walkway Lugs 2″ x 4″ w/ 2 slotted holes
  • Welded Ladder Lugs
  • D – Rings

Lugs Without Base

  • 1/8″ Thick x 1 1/4″ wide Lift Lug
  • 3/16″ Thick x 1 1/4″ wide Lift Lug
  • 3/8″ Thick x 2 1/2″ wide Lift Lug
  • Lift Lug – 8″ Base x 6 1/4″ High x 1/2″ thick w/ 3 1/2″ hole (ASTM 516 Grade 70)
  • Walkway Lug (w/ one hole)
  • Walkway Lug (w/ two hole)
  • Ladder Lug (w/ one hole)
  • Tie Down Lug
  • Lifting Eye (5/8″x1 ½” x 13.5 Flat Bar)
  • Lift Lug (1/2″ x 3″ x 5″) w/ 1 3/4″ dia. Hole
  • Lift Lug – 1/2″ thick x 1 1/2″ flat x 13″ long w/ 2″ x 8″ rise v-shaped
  • Lift Lug – 3/4″ HRR x 12″ long w/ 2″ x 8″ rise bowl-shaped

Tank Tops & Bottoms

  • “12′ Dia. x 3/16″” – Tank Top Set
  • w/ Thief Hatch & coupler holes (Customer supplied Mat’l)”
  • “12′ Dia. x 1/4″” – Tank Bottom Set
  • (Customer supplied Mat’l)”
  • 12 Dia. Tank Top Half w/ holes
  • 12 Dia Tank Top Half w/ no holes
  • 12 Dia Tank Bottom Half
  • 15’6″ Dia. Tank Top Half w/ holes
  • 15’6″ Dia Tank Top Half w/ no holes
  • 15’6″ Dia Tank Bottom Half

Small Tanks

  • Hydraulic
  • 3 Gal
  • 5 Gal
  • 10 Gal
  • 20 Gal
  • Obround Tank Heads – 13 Gauge

 

 

Manways

Flange ID x OD & Holes

  • 16″ ID x 20 1/2″OD w/ (16) 9/16″ BH on 19″ Bolt Circle
  • 16″ ID x 20 1/2″OD w/ (32) 9/16″ BH on 19″ Bolt Circle
  • 18″ ID x 22 1/2″ OD w/ (18) 9/16″ BH on 21″ Bolt Circle
  • 18″ ID x 22 1/2″ OD w/ (36) 9/16″ BH on 21″ Bolt Circle
  • 20″ ID x 24 1/2″ OD w/ (24) 9/16″ BH on 23″ Bolt Circle
  • 20″ ID x 24 1/2″ OD w/ (48) 9/16″ BH on 23″ Bolt Circle
  • 24″ ID x 28 1/2″ OD w/ (24) 9/16″ BH on 27″ Bolt Circle
  • 24″ ID x 28 1/2″ OD w/ (48) 9/16″ BH on 27″ Bolt Circle
  • 30″ ID x 35″ OD w/ (64) 5/8″ BH on 33″ Bolt Circle
  • 36″ ID x 42″ OD w/ (72) 5/8″ BH on 39″ Bolt Circle
  • Other

Flange Thickness

  • 1/4″
  • 5/16″
  • 3/8″
  • 1/2″
  • Other

Neck Width

  • 4″
  • 7″
  • 12″
  • Other

Neck Thickness

  • 1/4″
  • 5/16″
  • 3/8″
  • 1/2″
  • Other

Cover Thickness

  • 1/4″
  • 5/16″
  • 3/8″
  • 1/2″
  • Other

Gaskets & Bolts w/Nuts

  • 1/8″ Fiberflex
  • 1/8″ Fiberflex w/ 1/2″ x 1 1/2″ Bolts w/Nuts
Contact Us

Please fill out the form to contact us and we will get back to you asap.

Not readable? Change text. captcha txt